Powermate CHFN35P Use and Care Manual download pdf (Page 9)

7 - ENG LISH

ADJUSTING THE NAILING DEPTH

WARNING

Disconnect the tool from the air source before making

adjustments. Such precautionary safety measures reduce

the risk or unintentional tool operation.

1. Disconnect tool from air supply.

2. Remove nails from the tool.

3. Adjust tool driving depth:

 • Toreducethenaildepth,turntheadjustmentknob

counter clockwise (FIG 8).

 • To drive the nail deeper, turn the adjustment knob

clockwise (FIG 9).

4. Reload nails as described in the "Loading Nails" section

of this manual.

5. Reconnect air supply.

Depth of Drive

Adjustment

FIG. 8

Too Deep Flush

Turn the adjustment knob counter clockwise

Too Shallow

Turn the adjustment knob clockwise

Depth of Drive

Adjustment

FIG. 9

Flush

ADJUSTING THE EXHAUST

The direction of the exhaust vent can be changed by turning

the top cover (FIG 10).

FIG. 10

USING THE NO-MAR TIP

WARNING

When attaching or detaching the No-Mar Tip, be sure to

remove your ﬁnger from the trigger and disconnect the air

hose from the nailer.

If you like to protect the surface of workpiece against

scratches or markings made by the safety, attach the

accessory No-Mar Tip to the safety.

To replace the No-Mar Tip:

1. Disconnect air hose from tool.

2. Put the No-Mar Tip to the toe of the safety.

To remove the No-Mar Tip: Pull the no mar tip directly away

from tool.

NOTE: The nose cap may reduce nailing depth due to its

thickness. Re-adjustment of nailing depth is required.

FIG. 11

No-Mar Tip

Safety

MAINTENANCE

JAM CLEARING

If a nail becomes jammed in the tool, disconnect the air

hose and keep the tool pointed away from you while clearing

the jam.

1. Disconnect the tool from the air supply.

2. Remove nails from the tool.

3. Insert screwdriver into the driving mechanism.

4. Tap the screwdriver gently with a hammer. The inserted

screwdriver should push the driver blade back, freeing

the nail jam

5. Remove the bent nail, using needle-nose pliers if

necessary.

6. Reconnect the tool to the air supply.

7. Reload the tool with nails.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Powermate CHFN35P Use and Care Manual Page 9

Comments to this Manuals

Related products and manuals for Nail Gun Powermate CHFN35P