Powermate CHFN35P Use and Care Manual download pdf (Page 3)

1 - ENG LISH

IMPORTANT INFORMATION

WARNING

TO AVOID SERIOUS PERSONAL INJURY, ALL USERS AND

EMPLOYERS/OWNERS MUST READ AND UNDERSTAND

ALL INSTRUCTIONS IN THIS MANUAL BEFORE

OPERATING OR MAINTAINING THIS TOOL.

Keep this manual for the safety warnings and precautions,

operating, inspection, maintenance. Keep this manual and

the receipt in a safe and dry place for future reference.

EXPLANATION OF THE NAILING

ACTION

• SINGLE ACTUATION MECHANISM:

First, press the safety against the wood; next, pull

the trigger to drive the fastener. After fastening once,

fastening will not be possible again until the trigger is

released and pressed again.

• CONTACT ACTUATION MECHANISM:

First, press the safety against the wood; next, pull the

trigger to drive the fastener. First. Pull the trigger; next,

press the safety against the wood to drive the fastener.

If the trigger is held back, a fastener will be driven each

time when the safety is pressed against the wood.

• FULL SEQUENTIAL ACTUATION MECHANISM:

First, press the safety against the wood; next, pull the

trigger to drive the fastener. Follow the same sequence

to continue driving fasteners.

GENERAL SAFETY RULES

WORK AREA

• KEEP THE WORK AREA CLEAN AND WELL LIGHTED.

Cluttered benches and dark areas increase the risks of

accidents.

• DO NOT OPERATE THE TOOL IN EXPLOSIVE

ATMOSPHERES, such as in the presence of ﬂammable

liquids, gases, or dust. The tool creates a spark which

may ignite ﬂammable liquids, gases or dust.

• KEEP VISITORS AWAY. Do not let visitors handle the

tool. All visitors should be kept safety away from work

area.

• NEVER ENGAGE IN HORSEPLAY WITH THE TOOL.

Respect the tool as a working implement.

PERSONAL SAFETY

• OPERATORS AND OTHERS IN WORK AREA MUST

WEAR SAFETY GLASSES WITH SIDE SHIELDS. When

operating the tool, always wear safety glasses with

side shields, and make sure others in work area wear

safety glasses, too. Safety glasses must conform to the

requirements of American National Standards Institute,

ANSI Z87.1 and provide protection against ﬂying

particles both from the front and side.

The employer must enforce the use of safety glasses by

the tool operator and others in work area.

• ALWAYS WEAR EAR AND HEAD PROTECTION. Always

wear ear protection to protect your ears from loud noise,

Always wear head protection to protect your head from

ﬂying objects.

• USE SAFETY EQUIPMENT. A dust mask, non-skid safety

shoes and a hard hat must be used for the applicable

conditions. Wear a full face shield if you are producing

metal ﬁlings or wood chips.

• DRESS PROPERLY. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing, and

gloves away from moving parts. Loose clothes, jewelry,

or long hair can be caught in moving parts and increases

the risk of injury.

• STAY ALERT, WATCH WHAT YOU ARE DOING AND USE

COMMON SENSE WHEN OPERATING A POWER TOOL.

Do not use tool while tired or under the inﬂuence of

drugs, alcohol, or medication. A moment of inattention

while operating the tool may cause serious injury.

• AVOID UNINTENTIONAL FIRING. Keep ﬁngers away

from trigger when not driving fasteners, especially when

connecting the tool to the air supply.

• DO NOT OVERREACH. Keep proper footing and balance

at all times. Proper footing and balance enables better

control of the tool in unexpected situations.

• MAKE SURE AIR HOSE IS FREE OF SNAGS AND

OBSTRUCTIONS. DO NOT ATTACH AN AIR HOSE OR

TOOL TO YOUR BODY. Entangled or snarled hoses

can cause a loss of balance or footing in addition to

unintentional tool operation. Attach the hose to the

structure to reduce the risk of loss of balance of the hose

shifts.

TOOL USE AND CARE

• NEVER POINT TOOL AT YOURSELF OR OTHERS

IN WORK AREA. Always assume the tool contains

fasteners. Never point the tool at yourself or others,

whether it contains fasteners or not. If fasteners are

mistakenly driven, it can lead to severe injuries. Never

engage in horseplay with the tool. Respect the tool as a

working implement.

• KEEP FINGERS AWAY FROM TRIGGER WHEN NOT

DRIVING FASTENERS TO AVOID ACCIDENTAL FIRING.

Never carry the tool with ﬁnger on trigger since you

could drive a fastener unintentionally and injure yourself

or someone else. Always carry the tool by the handle

only.

• NEVER MODIFY OR ALTER A TOOL. Doing so may

cause it to malfunction and personal injuries may result.

• KNOW THIS TOOL. Read manual carefully, learn its

applications and limitations, as well as the speciﬁc

potential hazards related to this tool.

• USE ONLY FASTENERS THAT ARE RECOMMENDED

1 2 3 4 5 6 7 8 ... 39 40

Comments to this Manuals

No comments

Powermate CHFN35P Use and Care Manual Page 3

Comments to this Manuals

Related products and manuals for Nail Gun Powermate CHFN35P