Powermate PM0133250 User Manual download pdf (Page 9)

3. Remove the cross handle by pulling up on the handle. Tap with a rubber mallet, if required, to loosen and

remove the handle.

4. Install the handle uprights (item 29) into the frame and install with the same hardware (items 48, 51 and 55) which had

been removed when the cross handle was removed. Be sure that the silver crush bushings are in place. Do not tighten

until the tubes are completely installed to the cross handle.

5. Install the cross handle (items 28 and 34) onto the two support tubes. Install the two curved head screws (item 48)

from the accessory bolt bag and 13mm cap nuts (item 56).

Customer Hotline 1-800-445-1805English

HANDLE

UPRIGHTS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Powermate PM0133250 User Manual Page 9